Coil Processing Capabilities
Slitting Facilities:
18 Slitting lines | ||
---|---|---|
Gauge: | From 0.1mm up to 6.0mm | |
Width: | Max 1320mm on a thickness from 0.1mm to 3.0mm | |
Max 400mm on a thickness from 3.0mm to 6.0mm |
Cut to Length Facilities:
8 Blanking lines | ||
---|---|---|
Gauge: | From 0.4mm up to 6.0mm | |
Width: | Standard production up to 1500mm | |
Lengths: | 65mm up to 6000mm |
Polishing Facilities:
1 Abrasive belt polish | ||
---|---|---|
1 Brush polishing line | ||
Width/Finish: | 240 grit up to max 900mm wide | |
320 grit up to max 625mm wide |
Traverse Winding Facilities:
Vetchberry can supply traverse would material from 0.6mm up to 3.00mm thick and 10mm to 60mm wide, in all grades of steel. We have 4 traverse winding lines on site, with over 15 years experience in this type of processing.
Traditional ‘pancake’ coils at narrow widths often have the disadvantage of restricted OD, i.e. short coil lengths. For continuous feed applications, e.g. presswork, there is a growing demand for longer running feedstock. Why stop your production six times to load traditional ‘pancake’ coils when you could do it once with Traverse wound coils.
We can offer 2 inside coil diameters: 16” (406mm) or 20” (508mm)
We can offer de-burred edges on certain sizes.
Special Edges:
We can offer de-burred and fully rounded edges on certain sizes.
Coating:
We can supply poly-coating solutions and paper interleaving for surface protection.
Tempered Strip
Vetchberry have a dedicated team and facilities to produce top class temper rolled strip in various hardness ranges and specifications. The mill is capable of rolling a wide variety of gauges and tempers to suit the most demanding applications. A tension levelled product can also be offered where flatness is crucial.
Production, Stock Range, Rolling Programme:
Gauge Range: 0.20mm up to 3.0mm
Hardness Range: ¼ hard, ½ hard, ¾ hard and full hard
VPN Ranges: TR 230, TR 280, TR 330, TR 380 and TR 430
We can also offer custom rolled to encompass your specific hardness ranges.
Material can be supplied in sheared slit edges and de-burred/ dressed conditions.
Grades
Stock grades: 301, 304 and 316
To order: 201, 321 and 430
In House Rolling
Gauge: 3.0mm max – 0.20 min
Slitting
Widths: 6.0mm – 610mm (depending on gauge range)
Further information
- Vetchberry Brochure
- Additional Downloads